Filter By:
- Bar Ends (1)
- BMX (1)
- Bottom Brackets (47)
- Brakes/Levers/Pads (65)
- Cables (22)
- Cassettes/Freewheels (31)
- Chainrings (31)
- Chains (24)
- Show More Categories
- Cranksets (30)
- Derailleurs (39)
- Forks (2)
- Groups (4)
- Handlebar Grips/Tape (38)
- Handlebars (21)
- Headsets (15)
- Pedals (39)
- Saddles (35)
- Seatposts (10)
- Shift/Brake Combinations (15)
- Shifters (10)
- Stems (22)
- Other (129)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$5.00
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts.
- Sold as a pair; two bolts and two springs
- M4x0.7mm thread
- Length: 45mm
$19.99
Rubber Gecko is a cushy bar tape made with foam and an outer layer of natural rubber. Rubber Gecko offers a soft tactile grip with a bit of give to it. It wraps slightly fatter than our original gecko grip, but not by much. Perfect for the rainy, cold cobbled classics.
$29.99
Gecko Pave is a fabric and EVA foam base bar tape, topped with a layer of printed silicone. Applying a thin layer of silicone made it possible for us to produce a bar tape that is of similar weight to our Gecko Grip, while retaining the grippiness and overall feel of a pure silicone tape.
$30.00
Art Gecko is our new grippy polyurethane rubber bar tape with a colorful artistic patter on the drops. This pattern is called a tri-color tessellation. When wrapped from the bottom it fades to black about where the brake levers mount.
- Artistic pattern, 9 colorful choices
- Color below the drops, black up top
- Great feel, Polyurethane rubber surface
- 220 cm rolls, plenty of length
- Nice flat wrap
- 92 grams including the plugs
$18.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$25.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$25.00
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
$25.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$88.00
This upgraded version of the BB7 has a durable anodized finish and stainless steel hardware.
- For use with with long cable-pull levers
- Pad retraction and spring tension are adjustable
- Includes steel-backed organic pads
- Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Long Pull
- Rotor Included: No
- Weight: 204 g
- Hand-conforming silicone formula provides grip and shock absorption
- Silicone construction won't dull, harden, or fade over time
- 128mm length
- End plugs included
- Designed for linear pull & mechanical disc brakes
- Aluminum construction
- 2.5 finger
- 22.2mm (7/8-inch) clamp
- Left/Right: Right
- Reach adjust and return spring
- 88g each
$34.99
- Cold-forged chromoly construction
- 8 splines for removal
- Oversize 3-pawl design
- Heavy-duty use freewheel
- 13T and 14T fit Flip-Flop hubs only
- Speeds: Single
- Width: 3/32"
$120.00
The Cambium C19 All Weather Carved is a wider saddle made for an upright riding position. It features a hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride,” thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. The updated fiberglass reinforced backplate has loops for a saddle bag or other riding accessories.
- Vulcanized natural rubber and nylon top
- Steel rails with a reinforced plastic backplate
- Length: 275mm
- Width: 184mm
- Height: 52mm
- Weight: 490g
Campagnolo Return Spring Caliper Brake Part
Campagnolo Ultra Torque Cup and Bearing Kits. Includes 2 bearings and 2 seals.
- Kit includes 2 bearings and 2 seals
$55.45
For smooth shifting and a quiet drivetrain, pick up Campagnolo's Chorus 11-speed chain. It's unidirectional for unparalleled function and features lightweight hollow pins as well as an anti-friction treatment for shifting perfection. It also boasts excellent wear and flex resistance.
$197.95
Campagnolo's Chorus Cassette offers precise, fluid shifting for your 11-speed drivetrain. The teeth have been exquisitely engineered and machined from steel, then coated with a nickel-chrome surface treatment and mounted on an aluminum carrier for flawless shifts and excellent durability.
$237.00
Many top features are packed into the Centaur crankset. The four-arm design allows for independent bolt circles, offering greater stiffness and structural integrity, and also provides additional versatility, as a single crankset is compatible with both standard compact and semi-compact chainrings. Add these features to the first aluminium crankset with an Ultra-Torque axle and the result is a component that is very similar to the top-of-the range part.
- Requires use of Ultra-Torque bottom bracket cups-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings
- Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss
- Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain
- Ultra-Torque system have both drive and non-drive side bearings pre-installed
$1.08
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$5.99
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal.
- Compatible with 41mm and 42mm OD upper bearings
$11.00
Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each from Cane Creek.
$11.50
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$21.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$22.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$29.99 - $52.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
$34.99
Hellbender Lite bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
- Cane Creek Hellbender Lite Headset Bearing - 52mm, 36 x 45mm
$35.99
With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind.
- 7075 Aluminum thread ring
- 7075 Aluminum preload spacer adjuster
- Grade 5 Titanium 2.5mm hex fastening bolt
- Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles
$39.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$42.00
This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
Page 1 of 21
Next page